Double-glazed uPVC windows, made in Melbourne
Tilt and turn windows
One handle, two ways to open. Tilt the sash in at the top for secure ventilation, or turn it in from the side to open the window fully and clean both faces from inside. Our most secure window.
Why choose tilt and turn windows
Secure airflow
In the tilt position the sash opens only a little at the top, so you can leave it open for fresh air.
Clean from inside
Turn the sash fully inward to clean both sides of the glass without a ladder.
Our best energy ratings
Tilt and turn windows are pulled tight into the frame when locked, and rate from U-value 2.18 with standard double glazing down to 1.09 with Low-E triple glazing.
European design
Made from aluplast IDEAL 4000 profiles with HOPPE and Siegenia hardware, both covered by a 10-year warranty.
Layouts
Every window is made to measure. These are the layouts in our quote builder. For anything else, send us your plans.
- Tilt and turn
- Tilt and turn + Fixed
- Fixed + Tilt and turn + Fixed
- Tilt and turn + Fixed + Tilt and turn
- Tilt and turn over fixed light
- Tilt and turn + Fixed over fixed lights
- Fixed + Tilt and turn + Fixed over fixed lights
- Tilt and turn + Fixed + Tilt and turn over fixed lights
At a glance
- Frame
- aluplast IDEAL 4000 uPVC, made in our Dandenong South factory.
- Glass
- Double glazed, glazed on site after the frames are installed. Clear and obscure safety glass as standard, with better-performing options. We'll recommend glass for each opening.
- Colours
- Tropical white as standard, or 13 aludec metal-look and woodec timber-look finishes. The inside can match the outside or stay white.
- Warranty
- 10 years on uPVC frames and on HOPPE and Siegenia hardware. Glass and cylinder warranties also apply.
- Bushfire
- IDEAL 4000 windows are available for sites rated up to and including BAL-40. Tell us your site's BAL rating and we'll confirm the options.
- Flyscreens
- Our own flyscreens, designed for our uPVC frames, in nylon or aluminium mesh.
- Drawings
- Detailed drawings and installation details for every opening, for builders and architects.
See all colours and finishes, or visit the showroom to see real samples.
Energy ratings
Whole-window figures for our tilt and turn window, glass and frame together. Lower U-value means less heat lost. Lower SHGC means less summer sun heat let in.
| Glazing | U-value | SHGC |
|---|---|---|
| Baseline4/16/4 clear, WERS ALU-008-007 | 2.18 | 0.40 |
| ToplineLow-E triple glazed, WERS ALU-009-318 | 1.09 | 0.26 |
Figures from the Window Energy Rating Scheme (WERS) unless marked as a manufacturer estimate. U-value in W/m²K. Other glass options sit between these two points. How to read window ratings
On our projects
The Ripple House, Glen Iris
A new family home designed by Atlas Architects, fitted with InFrame aludec Jet Black uPVC lift and slide doors, tilt and turn windows and fixed windows.
Architect: Atlas Architects. Builder: Hadran Construction. Photography: ByDesign.
See our projects
On our projects
One House, Four Generations, Malvern
A multigenerational home designed for ageing in place. Fitted with InFrame white uPVC hinged doors, tilt and turn windows and awning windows.
Designer: Gisele Benkemoun, La Vie. Photography: Open House Melbourne.
See our projectsYou might also consider
Not sure what suits your opening? Send us your plans and we'll recommend one, or read our guide to measuring windows and doors.
Common questions
What is a tilt and turn window?
A European-style window that opens two ways from one handle. Turn the handle one way and the sash tilts inward at the top for ventilation. Turn it further and the sash swings inward from the side like a door, for full opening and cleaning.
Do tilt and turn windows open inward?
Yes, both the tilt and the turn positions open into the room. Allow for the sash swing when you plan blinds, curtains and furniture near the window.
Are tilt and turn windows energy efficient?
They are our best-performing opening window. With standard clear double glazing they rate U-value 2.18 (WERS ALU-008-007), and with Low-E triple glazing 1.09 (WERS ALU-009-318).
How long does it take to get my tilt and turn windows?
Most jobs take 8 to 12 weeks from approved quote to installation. Timing depends on our production schedule, and on lamination if you choose a colour we don't keep in stock.
Do you install, or supply only?
Both. For new homes, builders typically order supply-only and install using our drawings and installation details. For replacements in existing homes, our certified installers can complete the job for you.
More answers on our common questions and energy efficiency pages.



