Call

Double glazed uPVC windows and doors, made in Melbourne.

Made to measure in our Dandenong South factory since 2008, using European aluplast profiles. Warmer in winter, cooler in summer, quieter all year, and nothing to paint.

Get a free quote See windows and doors

Build your request online and see a supply-only estimate as soon as you send it. Prefer to talk? Call (03) 9791 1266.

Showroom at 134 Williams Road, Dandenong South, open weekdays 8am to 5pm.

Black uPVC sliding doors and windows beneath a curved corrugated eave, framed by tropical planting
The Ripple House, Glen Iris. Architect: Atlas Architects. Builder: Hadran Construction. Photography: ByDesign.

The window range

Every window comes with detailed drawings and installation details for your project, so builders and architects know exactly what's going in.

The door range

The same double-glazed uPVC as our windows, from compact sliders to wall-wide openings. Colours and finishes match across the whole house.

Not sure which door suits your opening? Send us your plans and we'll recommend one.

Our projects

Recent homes fitted with InFrame windows and doors.

Open-plan living, dining and kitchen opening through a wide black uPVC sliding door to a planted courtyard Covered deck with black uPVC doors beneath a curved corrugated eave Courtyard walkway lined with floor-to-ceiling black uPVC glazing under a sweeping curved roof Corner window seat framed by black uPVC windows looking out to tropical planting

The Ripple House, Glen Iris

A new family home designed by Atlas Architects, fitted with InFrame aludec Jet Black uPVC lift and slide doors, tilt and turn windows and fixed windows.

Architect: Atlas Architects. Builder: Hadran Construction. Photography: ByDesign.

Read the case study → See the project on the Atlas Architects site
Living room opening through white uPVC doors to a garden and plunge pool White rendered two-storey home with a projecting white-framed window above the carport Marble bathroom with a white uPVC window and fixed highlight above the bath Kitchenette under a sloping ceiling with angled white uPVC windows

One House, Four Generations, Malvern

A multigenerational home designed for ageing in place, with step-free thresholds and adaptable rooms. Fitted with InFrame white uPVC hinged doors, tilt and turn windows and awning windows.

Designer: Gisele Benkemoun, La Vie. Photography: Open House Melbourne.

Read the case study → See the project on the La Vie site
Travertine pool terrace lined with black-framed arched windows and sliding doors, beside a curved pool Terrace with a stone chimney, a black-framed arched window and a wide black sliding door opening to the lounge Kitchen with a long travertine island, a strip window above the bench and black-framed arched windows beyond Curved travertine kitchen island in front of a long, low black-framed window above the bench

Ballar Residence, Mount Eliza

A new coastal home built by Beachstone Homes, with black InFrame uPVC arched fixed windows, tilt and turn windows and Smart Slide doors.

Builder: Beachstone Homes. Photography: Urban Angles, courtesy of Beachstone Homes.

Read the case study → See the project on the Beachstone Homes site

Custom shapes

Raked, curved, arched and joined-glass windows, made to your measurements.

White uPVC raked window following a cathedral ceiling, with a fixed window below

Raked windows

Sloping heads that follow the roofline.
Tall aluplast uPVC window whose frame follows a curved timber ceiling bulkhead, looking out to trees and bamboo

Curved windows

Curved heads, shaped to the opening.
Arched uPVC window wall with a sliding door, seen from inside looking out to a deck and hills

Arched and bay windows

Feature walls and period homes, made to measure.
Dark-framed corner window where two panes of glass meet at the corner without a post, set in timber-look cladding

Joined glass windows

Glass-to-glass corners, with no post in the view.

Have an unusual opening? Send us the measurements.

Colours and finishes

Choose a sleek metal look or a textured timber look. Both are low maintenance and never need painting. Select a finish to preview it.

Standard white

Our classic, bright finish. The tropical-grade profile is made for high-UV Australian conditions and holds its colour for years.

aludec

A refined matte finish with the contemporary look of aluminium, without the gloss of traditional PVC. Monument and Surfmist match the Colorbond steel colours of the same name.

woodec

Deeply embossed timber grain you can see and feel, without the sanding, staining or rot. Suits both inside and outside faces.

aludec Anthracite Greyaludec metal-look finishSimilar to RAL 7016

Monument® and Surfmist® are registered trademarks of BlueScope Steel Limited. Screen colours are a guide only. Visit our showroom to see real samples.

Less heat lost in winter. Less heat gained in summer.

Windows are where most homes leak energy. Two numbers on every window label tell you how well it holds the line.

U-value

Lower is better. It measures how much heat escapes through the window.

The bigger your heating bill, the more a low U-value matters. Generally, the lower the number, the more you save.

SHGC

Solar heat gain. Look for 0.40 or less if summers overheat your home.

If you run the air conditioner hard or rooms bake in the afternoon, a lower SHGC keeps the sun's heat outside.

Quieter rooms

Low noise transmission from traffic and neighbours.

Nothing to maintain

No painting, no staining, no rot. Just clean the glass.

Built to last 40+ years

And fully recyclable at the end of its life.

10-year frame warranty

Plus up to 10 years on hardware. Warranty details

A preferred product

PVC windows and doors are listed as preferred building products by Sustainability Victoria.

How to read window ratings, and building to 7 stars

From quote to installed

  1. 1

    Get in touch

    Call us on (03) 9791 1266, send your plans, or build your request online and see a supply-only estimate when you send it.

  2. 2

    Approve your quote

    We prepare a detailed quotation. Once approved, a 50% deposit secures your order.

  3. 3

    We manufacture

    Made to measure in our Dandenong South factory from aluplast profiles with HOPPE and Siegenia hardware, typically 8 to 12 weeks from approved quote.

  4. 4

    Delivered or installed

    Delivered to site ($400 + GST Melbourne metro, $750 + GST regional Victoria), or installed by our certified installers. Installation is quoted after a site inspection.

Common questions

How much do uPVC windows cost?

Price depends on window sizes, types, glass and finish, so every job is quoted individually. For a quick guide, add your windows and doors to our online quote builder and you'll see a supply-only estimate as soon as you send it. Delivery is $400 + GST to Melbourne metro and $750 + GST to regional Victoria. Installation is quoted separately after a site inspection.

How long does it take to get my windows?

Most jobs take 8 to 12 weeks from approved quote to installation. Timing depends on our production schedule, and on lamination if you choose a colour we don't keep in stock. For smaller jobs, we can often fabricate alongside larger projects to shorten the wait.

What warranty do you offer?

Our uPVC frames carry a 10-year warranty. Component warranties include:

  • 10 years on HOPPE handle operation and Siegenia Titan/E-Look hardware
  • 7 years on AGG Insulglass units
  • 5 years on AGGLam laminated glass
  • 5 years on Euro cylinders (excluding keys)

Glass warranty periods begin from the date of manufacture. Warranty periods for other handles and hinges depend on the product selected.

Warranties are subject to applicable terms, exclusions and correct installation, use and maintenance. Removal and replacement labour may not be covered. These warranties are in addition to your rights under Australian Consumer Law.

What areas do you service?

We supply across all of Victoria and Canberra. Get in touch to check your location.

Do you install, or supply only?

Both. For new homes, builders typically order supply-only and install the windows themselves, using our drawings and installation details. For window replacements in existing homes, our teams of certified installers can complete the job for you.

Can you replace the windows in my existing home?

Yes. We replace existing windows with double-glazed uPVC made to suit your openings, and our certified installers handle the removal and installation.

Do your windows come with flyscreens?

Yes. We make our own flyscreens designed to fit our uPVC frames, available in nylon or aluminium mesh. They're easy to remove when you need to clean the glass. For doors, we fit low-profile retractable flyscreens that keep insects out without getting in the way.

Can you fit security screens?

Yes. Security screens can be fitted on request through our trusted supply partner.

Are your windows suitable for bushfire-prone areas?

Yes. Our IDEAL 4000 series windows, swing doors and Smart Slide doors are available for sites rated up to and including BAL-40. Tell us your site's BAL rating when you request a quote.

Questions about energy ratings? See energy efficiency.

Request a quote

Tell us about your project and we'll get back to you within one business day.

Send plans or a quick enquiry Build my quote, window by window, and see an estimate when you send

Send plans or a quick enquiry

Upload your plans or tell us about the job in a few lines, and we'll work out the details with you.

Type of project
What do you need?
What are you interested in?

We'll only use your details to respond to your enquiry. See our privacy policy.

Prefer to talk? Call (03) 9791 1266